To minimize wear tear and rusting of pneumatic valves, cylinders, components and tools, it is essential to keep them properly lubricated for best performance and long service life. Lubricators conveniently inject the oil directly into the air pipe lines, as carefully metered fine mist / fog, thus automatically lubricating all parts of air‑operated equipment. Airchamp Lubricators provide exceptionally high performance over a very wide flow range, without excessive pressure drop. The oil is easily set to the desired feed rate with the adjusting knob and once the rate is set, the lubricator automatically adjusts the drip rate
proportional to variations in air flow. The oil drop rate is clearly visible in the sight feed dome. Fine S. S. mesh is provided at the suction end to protect the oil from dirt and particles. One oil filling port and one vent valve button is provided on the body of the lubricator to depressurise the bowl for filling oil without shutting off the air supply. Available in three pipe sizes of 1/4 ‑ 3/8 ‑ 1/2 BSP. Maximum pressure 250 psig. Maximum temperature 50C. Polycarbonate transparent bowl of 230 ml. capacity. Available with Mettalic Bowl Guard also. Body pressure die cast zinc alloy / LM6. Parts acetal. Suction tube brass. Seal gaskets buna / viton.
50 mm dial back connection Pressure Gauge available on order.